Commercial & Industrial Flooring in Westford
Topcoat serves manufacturers, food producers and commercial facilities in Westford and the Merrimack Valley with epoxy and broadcast systems, urethane cement, MMA, ESD flooring and mechanically polished concrete.
Serving Westford and the Merrimack Valley
Topcoat Services, based in Hyannis, serves manufacturing, food production, office and commercial facilities in Westford and nearby towns such as Billerica, Chelmsford, Lowell and Haverhill. We select and install industrial flooring around traffic, cleaning, chemical exposure and the time an area can be out of service.
To start, send the address, approximate area, photos, how the space is used and your shutdown window. We assess the slab and recommend a system.
Westford Project
Telsonic, Westford
- Location
- Westford, MA
- Facility
- Manufacturing facility
- System
- Dur-A-Chip, a Dur-A-Flex broadcast chip system
- Area
- 4,778 SF
- Completed
- May 2025
Our crew mechanically prepared the slab with dust extraction connected to the equipment, then installed the Dur-A-Chip system across the open production floor.
Nearby, we completed 9,900 square feet of grind and seal on the fourth floor at Medtronic in Billerica, and urethane cement in a prep room at Joseph’s Gourmet Pasta in Haverhill.
Flooring Options for Westford Facilities
Many facilities need more than one system: a dry assembly area, a wash room and a warehouse aisle can each call for something different.
Epoxy and broadcast systems
Dry production, assembly, labs and workshops, with texture chosen for the traffic. Epoxy flooring
Urethane cement
Food production, washdown areas and hot or wet processes. Urethane cement · Food & beverage flooring
MMA
Full MMA systems for areas with very short shutdown windows. MMA guide
ESD / static control
Areas where the facility specifies static control, selected to the owner’s specification. Industrial flooring
Polished concrete
Dry warehouses and distribution areas with a sound slab. Polished concrete
Built Around Production
Forklifts and carts
Wheel types, turning areas and joint edges guide the build and the joint repairs.
Chemicals and cleaning
We check the actual products and contact times against each system’s documented resistance.
Static control
Where required, the system is matched to the facility’s static-control specification and testing.
Shutdown windows
We phase zones around production and plan the cure time before each area returns to service.
Preparation and Installation
Topcoat owns and operates its preparation equipment, including shot blasters, planetary grinders and industry-leading dust extraction vacuums. We investigate the substrate, remove weak concrete and failed coatings, repair cracks and joints, install the selected system and hand over cleaning and maintenance guidance.
What to Send First
The address, approximate square footage, photos or plans, the current floor and coating, traffic and equipment, chemicals and cleaning products used, any static-control specification and the shutdown window.
Westford Flooring FAQs
Does Topcoat serve industrial flooring projects in Westford?
Yes. We serve Westford and nearby Merrimack Valley towns from our base in Hyannis. In Westford, we installed a 4,778-square-foot Dur-A-Chip floor for Telsonic’s manufacturing facility. Send the address, area and photos to arrange an assessment.
Can you phase work around production?
Often, yes. We divide the floor into work zones, plan access routes, equipment moves and ventilation, and schedule each zone around the cure time the system needs. The plan is agreed with your team before work starts and depends on the selected system.
Which floor suits a manufacturing area with forklifts?
It depends on the traffic, loads, cleaning and chemicals. Dry assembly areas often suit epoxy or broadcast systems, wet or hot processes often suit urethane cement, and sound warehouse slabs can be polished. We review wheel types, joints and slab condition before recommending a build.
Do you install ESD flooring?
Yes. Topcoat installs ESD and static-control flooring where a facility requires it. The system is selected to the facility’s own static-control specification, and the requirements and any testing are agreed with the owner before work starts.
What should we send before an assessment?
Send the address, approximate square footage, photos or plans, the current floor and any coating, the traffic and equipment it carries, the chemicals and cleaners used, any static-control requirement and when the area can be out of service. That lets us prepare a useful site visit.
Plan Your Westford Flooring Project
Tell us how the facility operates, what is failing and when work can take place.
Call (774) 470-4951 or email info@topcoatservices.com. Topcoat Services, 105 Ferndoc Street, Suite F, Hyannis, MA 02601.